Center for Quantum Devices - Journal Articles and Conference Proceedings

Page 2 of 2: Prev << 1 2 (29 Items)

26.	Comparison of ultraviolet light-emitting diodes with peak emission at 340 nm grown on GaN substrate and sapphire A. Yasan, R. McClintock, K. Mayes, S.R. Darvish, H. Zhang, P. Kung, M. Razeghi, S.K. Lee and J.Y. Han Applied Physics Letters, 81 (12)-- September 16, 2002 Based on AlInGaN/AlInGaN multiquantum wells, we compare properties of ultraviolet light-emitting diodes (LED) with peak emission at 340 nm grown on free-standing hydride vapor phase epitaxially grown GaN substrate and on sapphire. For the LED grown on GaN substrate, a differential resistance as low as 13 Ω and an output power of more than one order of magnitude higher than that of the same structure grown on sapphire are achieved. Due to higher thermal conductivity of GaN, output power of the LEDs saturates at higher injection currents compared to the devices grown on sapphire. reprint
27.	Top-emission ultraviolet light-emitting diodes with peak emission at 280 nm A. Yasan, R. McClintock, K. Mayes, S.R. Darvish, P. Kung, and M. Razeghi Virtual Journal of Nanoscale Science & Technology, 5-- August 5, 2002reprint
28.	Top-emission ultraviolet light-emitting diodes with peak emission at 280 nm A. Yasan, R. McClintock, K. Mayes, S.R. Darvish, P. Kung, and M. Razeghi Applied Physics Letters 81 (5)-- July 29, 2002 We demonstrate light emission at 280 nm from UV light-emitting diodes consisting of AlInGaN/AlInGaN multiple quantum wells. Turn-on voltage of the devices is ~5 V with a differential resistance of ~40 Ω. The peak emission wavelength redshifts ~1 nm at high injection currents. reprint
29.	280 nm UV LEDs Grown on HVPE GaN Substrates A. Yasan, R. McClintock, K. Mayes, S.R. Darvish, P. Kung, M. Razeghi, and R.J. Molnar Opto-Electronics Review, 10 (4)-- January 1, 2002 We report on the enhancement of optical and electrical properties of 280 nm UV LEDs using low dislocation density HVPE-grown GaN substrate. Compared with the same structure grown on sapphire, these LEDs show ~30% reduction in current-voltage differential resistance, ~15% reduction in turn-on voltage, more than 200% increase in output power slope efficiency and saturation at higher currents. Lower density of defects due to higher material quality and better heat dissipation are believed to be the reason behind these improvements. reprint

Page 2 of 2: Prev << 1 2 (29 Items)